Leaderboard


Popular Content

Showing most liked content since 01/20/18 in all areas

  1. You can apply Totalboat 2 part Epoxy Primer both inside and outside and below the waterline. You always want to apply a primer on top of epoxy for the best adhesion. The Interlux primekote is only for above the waterline. You could use Interlux 2000E for both. The 2 part epoxy primer is a good primer for either Brightside, Wet Edge or any 2 part polyurethane paint. The 2 part poly will last longer but is much more expensive.
    1 like
  2. If the graphics are the vinyl press on type, then applying heat with a hair dryer will soften it so you can carefully scrap it off.
    1 like