• Announcements

    • skiptabor

      The future of the JD Forum   07/31/18

      Thank you all for your participation on the JD Forums.  We have enjoyed answering your questions, providing project advice and technical assistance on this forum for a number of years. We believe that there are now better ways to provide this service for our customers and the community. With that in mind, we have made the difficult decision to discontinue the Jamestown Distributors Forum.   Our JD Tech Team is committed to being your trusted technical resource, and we encourage you to reach out via email, phone, social, product reviews, and to post questions using the Q & A 'Ask A Question' function on all product pages. Additional information can also be found on product page Technical Data Sheets (including detailed usage instructions and application data).   Thank You Jamestown Distributors 

bobbarnettpe

Members
  • Content count

    2
  • Joined

  • Last visited

Everything posted by bobbarnettpe

  1. We did talk this morning Rick. I was checking to see anyone else had any experience. I have it down to just a couple of legs. I have one piece of 8/4 left, I might try to see if I can get a section out without checks. I planned to talk to MAS and see if they had any suggestions. If they have a light bulb go off above their head I will let you know. Thanks for responding. Bob
  2. I am building outdoor furniture out of cypress. The material was air dried and 8/4 that I milled down to about 1 5/8". I have found several checks in the material that I am using for legs. Most of the checks go less that 1/2" deep into the section. I would like to seal the checks but the cracks are too tight to get epoxy into them. Any recommendation on how to handle this would be appreciated. bob