• Announcements

    • skiptabor

      The future of the JD Forum   07/31/18

      Thank you all for your participation on the JD Forums.  We have enjoyed answering your questions, providing project advice and technical assistance on this forum for a number of years. We believe that there are now better ways to provide this service for our customers and the community. With that in mind, we have made the difficult decision to discontinue the Jamestown Distributors Forum.   Our JD Tech Team is committed to being your trusted technical resource, and we encourage you to reach out via email, phone, social, product reviews, and to post questions using the Q & A 'Ask A Question' function on all product pages. Additional information can also be found on product page Technical Data Sheets (including detailed usage instructions and application data).   Thank You Jamestown Distributors 

Rahbaba

Members
  • Content count

    2
  • Joined

  • Last visited

  1. I want to apply TotalBoat Clear Penetrating Epoxy (CPE) to some older bare-wood boat seats. What do you recommend for thinner - Acetone, or Denatured Alcohol ? After the CPE cures, what varnish do you recommend for the best UV protection?
  2. I have a wooden, 14' row boat that has been stripped of all it's old paint, and sanded. I coated the whole inside of the hull with Totalboat Penetrating epoxy, and on the outside of the hull I covered with West Epoxy and fiberglass. Now I'm ready to start applying primer paint to both inside and outside. I want to make sure that the wood hull is completely protected from water, and the paint is tough enough, so that's why I was thinking to use epoxy primer. I was thinking to use Interlux Epoxy Primekote to cover the inside, and Interlux 2000-E Epoxy primer for the outside of the hull. What is the main difference between these two epoxy primers? Could I use the TotalBoat Epoxy primer for all surfaces inside and outside? Is this overkill, and too much epoxy paint, or could I just use regular topside primer instead of the epoxy? I have washed off any amine-blush, and sanded smooth all surfaces. After the primer I plan to use either Brightside Poly paint or WetEdge poly paint, but I'm unsure if either of these topside polyurethene paints are compatible with the epoxy primer? Would you recommend a 2-part poly finish paint, or just single part poly?