• Announcements

    • skiptabor

      The future of the JD Forum   07/31/18

      Thank you all for your participation on the JD Forums.  We have enjoyed answering your questions, providing project advice and technical assistance on this forum for a number of years. We believe that there are now better ways to provide this service for our customers and the community. With that in mind, we have made the difficult decision to discontinue the Jamestown Distributors Forum.   Our JD Tech Team is committed to being your trusted technical resource, and we encourage you to reach out via email, phone, social, product reviews, and to post questions using the Q & A 'Ask A Question' function on all product pages. Additional information can also be found on product page Technical Data Sheets (including detailed usage instructions and application data).   Thank You Jamestown Distributors 

CaptainCronos

Members
  • Content count

    3
  • Joined

  • Last visited

About CaptainCronos

  • Rank
    Newbie
  • Birthday
  1. Thanks.
  2. Would the Thixo be used to fill just the holes or can I use it to extend the existing edging with it too? Bear with me, I've never really worked on fixing fiberglass.
  3. I am replacing an old hatch and 1) need to fill in the old screw and bolt holes and 2) most importantly, straighten the edges so that all the new screws can have something to grip. It seems whoever cut the old hatch, used a jigsaw after drinking a six-pack (or two) so there isn't a straight section to be found on any of the 4 sides. They ended up using plywood strips or trim to "cover their error" and bolting those down so they had something to screw the hatch down. The seat is 1/4 laminated fiberglass with no wood, no fillers, no stringers. I thought about installing the hatch edge/trim upside down from under the seat and filling the holes/gaps with fairing epoxy, however not sure how strong that would be or if it would do the trick. I welcome any and all ideas at this point. I'm sure I'm not the first to have this problem. Thanks.