The future of the JD Forum 07/31/18Thank you all for your participation on the JD Forums. We have enjoyed answering your questions, providing project advice and technical assistance on this forum for a number of years. We believe that there are now better ways to provide this service for our customers and the community. With that in mind, we have made the difficult decision to discontinue the Jamestown Distributors Forum. Our JD Tech Team is committed to being your trusted technical resource, and we encourage you to reach out via email, phone, social, product reviews, and to post questions using the Q & A 'Ask A Question' function on all product pages. Additional information can also be found on product page Technical Data Sheets (including detailed usage instructions and application data). Thank You Jamestown Distributors
Search the Community
Showing results for tags 'runabout'.
Found 1 result
Hello, I'm in the process of restoring a 1964 fiberglass run about. I am currently replacing the core of the hull and is going very well. I have a question about what coatings to use for the sides and bottom of boat. When ready to prime/paint I will need to deal with a combo of cleaned and sanded 50 year old gelcoat along with some areas that I will have repaired with thicken poly resin. The sides and bottom will be white and add up to about 140 square feet of area. My original plan was to use a 2 part epoxy primer and finish it with Interlux VC performance bottom paint as I don't really need any antifouling paint. I have since reconsidered because I read that the VC performance does not have any UV resistance and will yellow over time. I am getting a headache reading through forums trying to figure out my best options so I thought I would just ask the question directly. Can you tell me my best option to paint the bottom and sides of my 17 foot runabout. The boat will always be trailered when not in use and will not be in the water for any longer than 6 hours at a time. Probably not more that about 50 hours total a year I was thinking about using Totalboat barrier coat and Totalboat wet edge. Will this be ok or is there a better option? Thanks for your help!! Wally.