• Announcements

    • skiptabor

      The future of the JD Forum   07/31/18

      Thank you all for your participation on the JD Forums.  We have enjoyed answering your questions, providing project advice and technical assistance on this forum for a number of years. We believe that there are now better ways to provide this service for our customers and the community. With that in mind, we have made the difficult decision to discontinue the Jamestown Distributors Forum.   Our JD Tech Team is committed to being your trusted technical resource, and we encourage you to reach out via email, phone, social, product reviews, and to post questions using the Q & A 'Ask A Question' function on all product pages. Additional information can also be found on product page Technical Data Sheets (including detailed usage instructions and application data).   Thank You Jamestown Distributors 
Detwiler

Pettit SeaGold for ply lapstrake interior

3 posts in this topic

I'm restoring a 1960 16' lapstrake outboard runabout.  The interior hull and ribs do not have any flaking - I'm thinking to prep using Scotchbrite fine pads and then soap/water wash.  SeaGold is a new product - does anybody have any experience with it?  My plan is to use it for the interior finish down to the water line (not in the bilge).  Is it compatible with CPES?.  I'm thinking I would apply one coat of CPES as a sealer prior to SeaGold application.  My other product choice is Cetol.  Does anybody know how they differ?

Share this post


Link to post
Share on other sites

SEAGOLD is a water based satin polyurethane finish similar to cetol.  It should work well over CPES, but let the CPES cure before applying.

Share this post


Link to post
Share on other sites