• Announcements

    • skiptabor

      The future of the JD Forum   07/31/18

      Thank you all for your participation on the JD Forums.  We have enjoyed answering your questions, providing project advice and technical assistance on this forum for a number of years. We believe that there are now better ways to provide this service for our customers and the community. With that in mind, we have made the difficult decision to discontinue the Jamestown Distributors Forum.   Our JD Tech Team is committed to being your trusted technical resource, and we encourage you to reach out via email, phone, social, product reviews, and to post questions using the Q & A 'Ask A Question' function on all product pages. Additional information can also be found on product page Technical Data Sheets (including detailed usage instructions and application data).   Thank You Jamestown Distributors 
Wildmountain

More ? about bottom paint removal

2 posts in this topic

I have a Dyer 29 powerboat, 1968-70 that has god only knows how many layers of bottom paint. I mean layer upon layer upon layer. The chips are hard to break off. Is stripper still the way to go on this? I will post a picture or two if need be.

Share this post


Link to post
Share on other sites

With multiple layers of bottom paint we recommend applying 3/8" thick layer of Total Strip be applied and covered with plastic sheeting to keep it from drying out.  Let it sit overnight and then remove the plastic.  Some paint will come off with it and the rest can be scraped off.  This product works best when the temperature is in the 80's but can be used between 60 and 80+ degrees.  

Share this post


Link to post
Share on other sites